Bosch Hydropower 13H

BOSCH HYDROPOWER 13H EXTERNAL HOT WATER SYSTEM

The Bosch External HydroPower 13H system ignites when you turn on the tap to deliver 13 Litres per minute of hot water to suit one bathroom. There is no pilot light wasting gas and no electricity is needed for electronic ignition.


Water flows through a small turbine creating the energy needed to ignite the burner and then turns it off when you turn off the tap. Saves on gas, saves on electricity and makes installation a breeze.


An ideal replacement for storage hot water systems.

✓ Hydropower ignition system
✓ Continuous flow technology (heats only when required)
✓ 5.2 Star energy rating
✓ No 240 volt power required
✓ Designed for external installation only
✓ User controls allows adjustment of the temperature and water flow
✓ Available in Natural Gas or LPG models
✓ Attractive alternative to storage water heater when no power required
✓ Available in 10, 13 & 16 L/minute capacities

Height845 mm
Width405 mm
Depth265 mm
Weight22 kg
InstallationExternal
IgnitionHydro
L/min (25°C rise)10
Min. inlet water pressure (kPa)40
Min. constant water pressure for Max. flow (kPa)100
Max. inlet water pressure (kPa)800
Mj/H104
Energy Star Rating5.2
Min. Flow (L/min)3.5
Gas TypeNG/LPG
Warranty
Parts and Labour2 Years
Heat Exchanger (part only)10 Years
Pipe Connection Size
Natural gas (NG)20 mm (3/4”)
LP gas15 mm (1/2”)
Cold Water15 mm (1/2”)
Hot Water15 mm (1/2”)

Bosch Hydropower 13H Hot Water System 

SUPPLY & INSTALL
$1099.00

      ✔ Fully installed straight swap
Includes plumber labour
Includes gas fitter labour
Includes old unit disposal


   Bosch Hydropower 13H  

BOSCH HYDROPOWER 13H EXTERNAL HOT WATER SYSTEM

SUPPLY & INSTALL $1099.00


Bosch Hydropower 13H Hot Water System

The Bosch External HydroPower 13H system ignites when you turn on the tap to deliver 13 Litres per minute of hot water to suit one bathroom. There is no pilot light wasting gas and no electricity is needed for electronic ignition.


Water flows through a small turbine creating the energy needed to ignite the burner and then turns it off when you turn off the tap. Saves on gas, saves on electricity and makes installation a breeze.


An ideal replacement for storage hot water systems.

✓ Hydropower ignition system
✓ Continuous flow technology (heats only when required)
✓ 5.2 Star energy rating
✓ No 240 volt power required
✓ Designed for external installation only
✓ User controls allows adjustment of the temperature and water flow
✓ Available in Natural Gas or LPG models
✓ Attractive alternative to storage water heater when no power required
✓ Available in 10, 13 & 16 L/minute capacities

Height845 mm
Width405 mm
Depth265 mm
Weight22 kg
InstallationExternal
IgnitionHydro
L/min (25°C rise)10
Min. inlet water pressure (kPa)40
Min. constant water pressure for Max. flow (kPa)100
Max. inlet water pressure (kPa)800
Mj/H104
Energy Star Rating5.2
Min. Flow (L/min)3.5
Gas TypeNG/LPG
Warranty
Parts and Labour2 Years
Heat Exchanger (part only)10 Years
Pipe Connection Size
Natural gas (NG)20 mm (3/4”)
LP gas15 mm (1/2”)
Cold Water15 mm (1/2”)
Hot Water15 mm (1/2”)

Same day 24/7 service

Fully installed straight swap

Includes plumber labour 

Includes gas fitter labour 

 Includes old unit disposal 

IMPORTANT INFORMATION ABOUT INSTALLING YOUR GAS HOT WATER SYSTEM 


 

 

- Price shown is for external installation during normal business hours (Mon - Fri 7am til 5pm). Work performed outside the standard trading period is subject to overtime loadings.
        *For installations outside normal hours, please phone us to organise a price.

- Installation includes:

        ✓ Delivery

        ✓ Clean Up

        ✓ Removal of rubbish and old system

- Quoted price is for the straight change over of the unit

        *If existing fittings, unit type or location are changed, additional charges may apply

- We recommend the installation of a tempering valve to maintain a constant temperature and avoid the risk of scalds on all
installations where alterations to the pipework is required

- No tempering valve is required on 50° preset instantaneous units

 

IMPORTANT INFORMATION ABOUT INSTALLING YOUR GAS HOT WATER SYSTEM 


 

 

- Price shown is for external installation during normal business hours (Mon - Fri 7am til 5pm). Work performed outside the standard trading period is subject to overtime loadings.
        *For installations outside normal hours, please phone us to organise a price.

- Installation includes:

        ✓ Delivery

        ✓ Clean Up

        ✓ Removal of rubbish and old system

- Quoted price is for the straight change over of the unit

        *If existing fittings, unit type or location are changed, additional charges may apply

- We recommend the installation of a tempering valve to maintain a constant temperature and avoid the risk of scalds on all installations where alterations to the pipework is required

- No tempering valve is required on 50° preset instantaneous units

For all your hot water needs, contact Mr Plumber Perth. We will beat any genuine like for like quote. 

For all your hot water needs, contact Mr Plumber Perth. We will beat any genuine like for like quote.