rheem-plumber-perth

  Rheem 4 Star Gas 135L

Rheem-4 Star-135L-Hot-Water-Storage-System

Update your hot water system and save on your gas bills with the Rheem 4 Star 135L Gas Hot Water Storage System. With its superior versatility and energy efficiency, this hot water system from Rheem is the perfect solution for homes with 1 to 2 people.

✓ 4 Star energy efficiency — uses less gas than most older gas water heaters
✓ Mains pressure so you can run a dishwasher and shower or multiple taps at the same time
✓ 252L first hour capacity — for less waiting time between showers
✓ Easy replacement – common fittings with standard 3 Star models allow fast, low cost replacement
✓ Available in Natural Gas and LPG
✓ Warranty: 7 years on Cylinder, 3 years Labour on Cylinder, 1 years parts & labour warranty on all other components, for Domestic (non-Commercial) installations

This energy efficient Rheem hot water storage system uses less gas than most older gas hot water systems.
Height1558 mm
Width422 mm
Depth502 mm
Weight59 kg
Storage Capacity (Litres)135 L
Recovery Rate @ 45°C Rise (Litres/Hour)117
First Hour Capacity (Litres)252
Natural Gas (MJ)27
Propane (LPG) (MJ)26
Relief Valve Setting (kPa)1400
Expansion Control Valve Setting (kPa)1200
Energy Star Rating4.1
Max. Supply Pressure
without ECV (kPa)1120
with ECV4 (kPa)960

Rheem 4 Star 135L Gas Storage Hot Water System

SUPPLY & INSTALL
$1349.00

      ✔ Fully installed straight swap
Includes plumber labour
Includes gas fitter labour
Includes old unit disposal

rheem-plumber-perth

Rheem 4 Star Gas 135L 

Rheem-4 Star-135L-Hot-Water-Storage-System

SUPPLY & INSTALL $1349.00


Rheem 4 Star 135L Gas Storage Hot Water System 

Update your hot water system and save on your gas bills with the Rheem 4 Star 135L Gas Hot Water Storage System. With its superior versatility and energy efficiency, this hot water system from Rheem is the perfect solution for homes with 1 to 2 people.

✓ 4 Star energy efficiency — uses less gas than most older gas water heaters
✓ Mains pressure so you can run a dishwasher and shower or multiple taps at the same time
✓ 252L first hour capacity — for less waiting time between showers
✓ Easy replacement – common fittings with standard 3 Star models allow fast, low cost replacement
✓ Available in Natural Gas and LPG
✓ Warranty: 7 years on Cylinder, 3 years Labour on Cylinder, 1 years parts & labour warranty on all other components, for Domestic (non-Commercial) installations

This energy efficient Rheem hot water storage system uses less gas than most older gas hot water systems.
Height1558 mm
Width422 mm
Depth502 mm
Weight59 kg
Storage Capacity (Litres)135 L
Recovery Rate @ 45°C Rise (Litres/Hour)117
First Hour Capacity (Litres)252
Natural Gas (MJ)27
Propane (LPG) (MJ)26
Relief Valve Setting (kPa)1400
Expansion Control Valve Setting (kPa)1200
Energy Star Rating4.1
Max. Supply Pressure
without ECV (kPa)1120
with ECV4 (kPa)960

Same day 24/7 service

Fully installed straight swap

Includes plumber labour 

Includes gas fitter labour 

 Includes old unit disposal 

IMPORTANT INFORMATION ABOUT INSTALLING YOUR GAS HOT WATER SYSTEM 


 

 

- Price shown is for external installation during normal business hours (Mon - Fri 7am til 5pm). Work performed outside the standard trading period is subject to overtime loadings.
        *For installations outside normal hours, please phone us to organise a price.

- Installation includes:

        ✓ Delivery

        ✓ Clean Up

        ✓ Removal of rubbish and old system

- Quoted price is for the straight change over of the unit

        *If existing fittings, unit type or location are changed, additional charges may apply

- We recommend the installation of a tempering valve to maintain a constant temperature and avoid the risk of scalds on all
installations where alterations to the pipework is required

- No tempering valve is required on 50° preset instantaneous units

 

IMPORTANT INFORMATION ABOUT INSTALLING YOUR GAS HOT WATER SYSTEM 


 

 

- Price shown is for external installation during normal business hours (Mon - Fri 7am til 5pm). Work performed outside the standard trading period is subject to overtime loadings.
        *For installations outside normal hours, please phone us to organise a price.

- Installation includes:

        ✓ Delivery

        ✓ Clean Up

        ✓ Removal of rubbish and old system

- Quoted price is for the straight change over of the unit

        *If existing fittings, unit type or location are changed, additional charges may apply

- We recommend the installation of a tempering valve to maintain a constant temperature and avoid the risk of scalds on all installations where alterations to the pipework is required

- No tempering valve is required on 50° preset instantaneous units

For all your hot water needs, contact Mr Plumber Perth. We will beat any genuine like for like quote. 

For all your hot water needs, contact Mr Plumber Perth. We will beat any genuine like for like quote.