Bosch 16P Pilot Ignition 

Bosch-16P-Pilot-Ignition-Hot-Water-System

Externally installed and producing 16 Litres per minute of hotwater to suit one or two bathrooms, the Pilot series use a standing pilot light to ignite the burner when hot water is required.

 

The Bosch pilot models uses the long standing principles of design and performance to create a traditional hot water product.

240 volt power not required, and easy change over in this traditional design.

✓ Standing pilot light (traditional design) and operation
✓ 4.3 Star energy rating
✓ Continuous flow design
✓ No 240 volt power required
✓ Designed for external installation only
✓ Available in 10 & 16 L/minute capacities
✓ Attractive alternative to storage water heater when no power required
✓ Available in Natural Gas only

Height 936 mm
Width460 mm
Depth 265 mm
Weight24 kg
InstallationExternal
IgnitionPilot
L/min (25°C rise)16
Min. inlet water pressure (kPa)50
Min. constant water pressure for Max. flow (kPa)150
Max. inlet water pressure (kPa)1200
Mj/H130
Energy Star Rating4.3
Min. Flow (L/min)2
Gas TypeNG
Warranty
Parts and Labour2 Years
Heat Exchanger (part only)10 Years
Pipe Connection Size
Natural gas (NG)20 mm (3/4”)
LP gas15 mm (1/2”)
Cold Water15 mm (1/2”)
Hot Water15 mm (1/2”)

Bosch 16P Pilot Ignition Hot Water System 

SUPPLY & INSTALL
$1099.00

      ✔ Fully installed straight swap
Includes plumber labour
Includes gas fitter labour
Includes old unit disposal


   Bosch 16P Pilot Ignition 

Bosch-16P-Pilot-Ignition-Hot-Water-System

SUPPLY & INSTALL $1099.00


Bosch 16P Pilot Ignition Hot Water System

 

Externally installed and producing 16 Litres per minute of hotwater to suit one or two bathrooms, the Pilot series use a standing pilot light to ignite the burner when hot water is required.

 

The Bosch pilot models uses the long standing principles of design and performance to create a traditional hot water product.

240 volt power not required, and easy change over in this traditional design.

✓ Standing pilot light (traditional design) and operation
✓ 4.3 Star energy rating
✓ Continuous flow design
✓ No 240 volt power required
✓ Designed for external installation only
✓ Available in 10 & 16 L/minute capacities
✓ Attractive alternative to storage water heater when no power required
✓ Available in Natural Gas only

Height 936 mm
Width460 mm
Depth 265 mm
Weight24 kg
InstallationExternal
IgnitionPilot
L/min (25°C rise)16
Min. inlet water pressure (kPa)50
Min. constant water pressure for Max. flow (kPa)150
Max. inlet water pressure (kPa)1200
Mj/H130
Energy Star Rating4.3
Min. Flow (L/min)2
Gas TypeNG
Warranty
Parts and Labour2 Years
Heat Exchanger (part only)10 Years
Pipe Connection Size
Natural gas (NG)20 mm (3/4”)
LP gas15 mm (1/2”)
Cold Water15 mm (1/2”)
Hot Water15 mm (1/2”)

Same day 24/7 service

Fully installed straight swap

Includes plumber labour 

Includes gas fitter labour 

 Includes old unit disposal 

IMPORTANT INFORMATION ABOUT INSTALLING YOUR GAS HOT WATER SYSTEM 


 

 

- Price shown is for external installation during normal business hours (Mon - Fri 7am til 5pm). Work performed outside the standard trading period is subject to overtime loadings.
        *For installations outside normal hours, please phone us to organise a price.

- Installation includes:

        ✓ Delivery

        ✓ Clean Up

        ✓ Removal of rubbish and old system

- Quoted price is for the straight change over of the unit

        *If existing fittings, unit type or location are changed, additional charges may apply

- We recommend the installation of a tempering valve to maintain a constant temperature and avoid the risk of scalds on all
installations where alterations to the pipework is required

- No tempering valve is required on 50° preset instantaneous units

 

IMPORTANT INFORMATION ABOUT INSTALLING YOUR GAS HOT WATER SYSTEM 


 

 

- Price shown is for external installation during normal business hours (Mon - Fri 7am til 5pm). Work performed outside the standard trading period is subject to overtime loadings.
        *For installations outside normal hours, please phone us to organise a price.

- Installation includes:

        ✓ Delivery

        ✓ Clean Up

        ✓ Removal of rubbish and old system

- Quoted price is for the straight change over of the unit

        *If existing fittings, unit type or location are changed, additional charges may apply

- We recommend the installation of a tempering valve to maintain a constant temperature and avoid the risk of scalds on all installations where alterations to the pipework is required

- No tempering valve is required on 50° preset instantaneous units

For all your hot water needs, contact Mr Plumber Perth. We will beat any genuine like for like quote. 

For all your hot water needs, contact Mr Plumber Perth. We will beat any genuine like for like quote.