rheem-plumber-perth

  Rheem Metro 16L 

 

The Rheem Metro Continuous Flow gas water heater is a compact, medium capacity model that's ideal for homes with limited space, perfect for apartments and townhouses. Suitable for up to 1.5 bathrooms, this 6 star energy rated continuous flow hot water system can operate on either natural gas or LPG. Continuous flow water heaters work differently from storage water heaters only heating on demand rather than heating and storing water until needed.

✓ 6 Star energy efficiency
✓ 16 Litre/minute continuous hot water delivery
✓ Flamesafe® overheat protection — shuts down the water heater before overheating can occur
✓ Electronic remote temperature controllers - for accurate setting of the ideal, safe temperature for bathroom and kitchen
✓ Rheem Q Factor™ - ensures rapid hot water every time, with none of the fluctuations that occur with some continuous flow units
✓ Extra safety — 50°C temperature limited models available. Natural gas and propane models available.
✓ Proudly made in Australia

Height1600 mm
Width485 mm
Depth558 mm
Weight70 kg
Storage Capacity (Litres)130
Recovery Rate @ 45°C Rise (Litres/Hour)200
First Hour Capacity (Litres)330
Natural Gas (MJ)42
Relief Valve Setting (kPa)1400
Expansion Control Valve Setting (kPa)1200
Energy Star Rating4.1
Max. Supply Pressure
without ECV (kPa)1120
with ECV4 (kPa)960

Rheem Metro 16L Continuous Hot Water System

SUPPLY & INSTALL*
$1099.00

      ✔ Fully installed straight swap
Includes plumber labour
Includes gas fitter labour
Includes old unit disposal

*installation terms & conditions

rheem-plumber-perth

Rheem Metro 16L

 

SUPPLY & INSTALL $1099.00


Rheem Metro 16L Continuous Hot Water System 

The Rheem Metro Continuous Flow gas water heater is a compact, medium capacity model that's ideal for homes with limited space, perfect for apartments and townhouses. Suitable for up to 1.5 bathrooms, this 6 star energy rated continuous flow hot water system can operate on either natural gas or LPG. Continuous flow water heaters work differently from storage water heaters only heating on demand rather than heating and storing water until needed.

✓ 6 Star energy efficiency
✓ 16 Litre/minute continuous hot water delivery
✓ Flamesafe® overheat protection — shuts down the water heater before overheating can occur
✓ Electronic remote temperature controllers - for accurate setting of the ideal, safe temperature for bathroom and kitchen
✓ Rheem Q Factor™ - ensures rapid hot water every time, with none of the fluctuations that occur with some continuous flow units
✓ Extra safety — 50°C temperature limited models available. Natural gas and propane models available.
✓ Proudly made in Australia

Height1600 mm
Width485 mm
Depth558 mm
Weight70 kg
Storage Capacity (Litres)130
Recovery Rate @ 45°C Rise (Litres/Hour)200
First Hour Capacity (Litres)330
Natural Gas (MJ)42
Relief Valve Setting (kPa)1400
Expansion Control Valve Setting (kPa)1200
Energy Star Rating4.1
Max. Supply Pressure
without ECV (kPa)1120
with ECV4 (kPa)960

Same day 24/7 service

Fully installed straight swap

Includes plumber labour 

Includes gas fitter labour 

 Includes old unit disposal 

GAS & ELECTRIC STORAGE HOT WATER SYSTEM INSTALLATION CONDITIONS


- Price shown is for external installation during normal business hours (Mon - Fri 7am til 5pm). Work performed outside the standard trading hours is subject to overtime loadings. For installations outside normal hours, please phone us to organise and fix a price.

- If existing fittings, unit type or location are changed, additional charges may apply

- Prices listed assume that the existing hot water system installation complies with relevant codes and installation requirements

- Prices listed allow for minor pipework adjustments only 

- The installation of tempering valves and gas isolation valves are a mandatory requirement for all new hot water system installations 

- Where tempering valves and gas isolation valves have not been fitted to the existing hot water system installations additional costs will be incurred for these items

- Prices do not include allowances for existing gas leaks

- Prices do not include cost of electrician's services where applicable  

GAS & ELECTRIC STORAGE HOT WATER SYSTEM - ADDITIONAL INSTALLATION CONDITIONS


- Remove existing hot water system and packaging from site $50 

- Replace existing tempering valve $100 

- Supply and install new tempering valve (includes pipework adjustments) $150

- Replace expansion relief valve $70 

- Supply and fit new gas isolation valve $40 

- Supply and install new water isolation valve (Duo Valve) $50 

- Supply and fit weatherproof power point (by licensed electrician) $150 

- Licensed electrician fee to decommission and reconnect electric storage or electric instantaneous hot water systems $180

ALL MAKES AND MODELS AVAILABLE ON REQUEST 


 

GAS & ELECTRIC STORAGE HOT WATER SYSTEM - ADDITIONAL INSTALLATION CONDITIONS


- Price shown is for external installation during normal business hours (Mon - Fri 7am til 5pm). Work performed outside the standard trading hours is subject to overtime loadings. For installations outside normal hours, please phone us to organise and fix a price.

- If existing fittings, unit type or location are changed, additional charges may apply

- Prices listed assume that the existing hot water system installation complies with relevant codes and installation requirements

- Prices listed allow for minor pipework adjustments only 

- The installation of tempering valves and gas isolation valves are a mandatory requirement for all new hot water system installations 

- Where tempering valves and gas isolation valves have not been fitted to the existing hot water system installations additional costs will be incurred for these items

- Prices do not include allowances for existing gas leaks

- Prices do not include cost of electrician's services where applicable


GAS & ELECTRIC STORAGE HOT WATER SYSTEM - ADDITIONAL INSTALLATION CONDITIONS


- Remove existing hot water system and packaging from site $50 

- Replace existing tempering valve $100 

- Supply and install new tempering valve (includes pipework adjustments) $150

- Replace expansion relief valve $70 

- Supply and fit new gas isolation valve $40 

- Supply and install new water isolation valve (Duo Valve) $50 

- Supply and fit weatherproof power point (by licensed electrician) $150 

- Licensed electrician fee to decommission and reconnect electric storage or electric instantaneous hot water systems $180

ALL MAKES AND MODELS AVAILABLE ON REQUEST 


 

For all your hot water needs, contact Mr Plumber Perth. We will beat any genuine like for like quote. 

For all your hot water needs, contact Mr Plumber Perth. We will beat any genuine like for like quote.