Bosch 10P Pilot Ignition 

Bosch 10P Pilot Ignition Gas Continous Flow Hot Water System

Externally installed and producing 10 Litres per minute of hotwater to suit one bathroom, the Pilot series use a standing pilot light to ignite the burner when hot water is required.


The Bosch pilot models uses the long standing principles of design and performance to create a traditional hot water product.

240 volt power not required, and easy change over in this traditional design.

✓ Standing pilot light (traditional design) and operation
✓ 4.6 Star energy rating
✓ Continuous flow design
✓ No 240 volt power required
✓ Designed for external installation only
✓ Available in 10 & 16 L/minute capacities
✓ Attractive alternative to storage water heater when no power required

Height845 mm
Width405 mm
Depth265 mm
Weight21 kg
InstallationExternal
IgnitionPilot
L/min (25°C rise)10
Min. inlet water pressure (kPa)30
Min. constant water pressure for Max. flow (kPa)90 (NG) 55 (LPG)
Max. inlet water pressure (kPa)1200
Mj/H82
Energy Star Rating4.6
Min. Flow (L/min)5
Gas TypeNG/LPG
Warranty
Parts and Labour2 Years
Heat Exchanger (part only)10 Years
Pipe Connection Size
Natural gas (NG)20 mm (3/4”)
LP gas15 mm (1/2”)
Cold Water15 mm (1/2”)
Hot Water15 mm (1/2”)

Bosch 10P Pilot Ignition Hot Water System 

SUPPLY & INSTALL
$899.00

      ✔ Fully installed straight swap
Includes plumber labour
Includes gas fitter labour
Includes old unit disposal


   Bosch 10P Pilot Ignition 

Bosch 10P Pilot Ignition Gas Continous Flow Hot Water System

SUPPLY & INSTALL $899.00


Bosch 10P Pilot Ignition Hot Water System

 

Externally installed and producing 10 Litres per minute of hotwater to suit one bathroom, the Pilot series use a standing pilot light to ignite the burner when hot water is required.


The Bosch pilot models uses the long standing principles of design and performance to create a traditional hot water product.

240 volt power not required, and easy change over in this traditional design.

✓ Standing pilot light (traditional design) and operation
✓ 4.6 Star energy rating
✓ Continuous flow design
✓ No 240 volt power required
✓ Designed for external installation only
✓ Available in 10 & 16 L/minute capacities
✓ Attractive alternative to storage water heater when no power required

Height845 mm
Width405 mm
Depth265 mm
Weight21 kg
InstallationExternal
IgnitionPilot
L/min (25°C rise)10
Min. inlet water pressure (kPa)30
Min. constant water pressure for Max. flow (kPa)90 (NG) 55 (LPG)
Max. inlet water pressure (kPa)1200
Mj/H82
Energy Star Rating4.6
Min. Flow (L/min)5
Gas TypeNG/LPG
Warranty
Parts and Labour2 Years
Heat Exchanger (part only)10 Years
Pipe Connection Size
Natural gas (NG)20 mm (3/4”)
LP gas15 mm (1/2”)
Cold Water15 mm (1/2”)
Hot Water15 mm (1/2”)

Same day 24/7 service

Fully installed straight swap

Includes plumber labour 

Includes gas fitter labour 

 Includes old unit disposal 

GAS & ELECTRIC STORAGE HOT WATER SYSTEM - INSTALLATION CONDITIONS


- Price shown is for external installation during normal business hours (Mon - Fri 7am til 5pm). Work performed outside the standard trading period is subject to overtime loadings. For installations outside normal hours, please phone us to organise a price.

- If existing fittings, unit type or location are changed, additional charges may apply

- The installation of tempering valves and gas isolation valves are a mandatory requirement for all new hot water system installations 

- Where tempering valves and gas isolation valves have not been fitted to the existing hot water system installations additional costs will be incurred for these items

- Prices do not include allowances for existing gas leaks

- Prices do not include cost of electrician's services where applicable  

ADDITIONAL HOT WATER INSTALLATION COSTS


- Remove existing hot water system and packaging from site $50 

- Replace existing tempering valve $100 

- Supply and install new tempering valve (includes pipework adjustments) $150

- Replace expansion relief valve $70 

- Supply and fit new gas isolation valve $40 

- Supply and install new water isolation valve (Duo Valve) $50 

- Supply and fit weatherproof power point (by licensed electrician) $150 

- Licensed electrician fee to decommission and reconnect electric storage or electric instantaneous hot water systems $180

ALL MAKES AND MODELS AVAILABLE ON REQUEST 


 

GAS & ELECTRIC STORAGE HOT WATER SYSTEM - INSTALLATION CONDITIONS


- Price shown is for external installation during normal business hours (Mon - Fri 7am til 5pm). Work performed outside the standard trading period is subject to overtime loadings. For installations outside normal hours, please phone us to organise a price.

- If existing fittings, unit type or location are changed, additional charges may apply

- The installation of tempering valves and gas isolation valves are a mandatory requirement for all new hot water system installations 

- Where tempering valves and gas isolation valves have not been fitted to the existing hot water system installations additional costs will be incurred for these items

- Prices do not include allowances for existing gas leaks

- Prices do not include cost of electrician's services where applicable  

ADDITIONAL HOT WATER INSTALLATION COSTS


- Remove existing hot water system and packaging from site $50 

- Replace existing tempering valve $100 

- Supply and install new tempering valve (includes pipework adjustments) $150

- Replace expansion relief valve $70 

- Supply and fit new gas isolation valve $40 

- Supply and install new water isolation valve (Duo Valve) $50 

- Supply and fit weatherproof power point (by licensed electrician) $150 

- Licensed electrician fee to decommission and reconnect electric storage or electric instantaneous hot water systems $180

ALL MAKES AND MODELS AVAILABLE ON REQUEST 


 

For all your hot water needs, contact Mr Plumber Perth. We will beat any genuine like for like quote. 

For all your hot water needs, contact Mr Plumber Perth. We will beat any genuine like for like quote.